Boiler Service and Maintenance

Why Boiler Servicing Is Important

• Keeps your boiler safe
• Reduces risk of breakdowns
• Improves efficiency
• Extends lifespan
• Helps maintain manufacturer warranty
• Required for landlord gas safety compliance

A boiler service is a routine safety and performance check carried out by 0ur qualified gas engineers

1. Visual Inspection

• Check the boiler and pipework for leaks or corrosion
• Ensure the boiler is installed correctly
• Inspect ventilation and flue positioning

2. Boiler Casing Removal & Internal Inspection

• Remove the outer case
• Check internal components for wear and damage
• Inspect seals and gaskets

3. Cleaning Key Components

• Clean the burner
• Clean the heat exchanger if required
• Clean ignition components if required
• Remove debris from condensate trap (for condensing boilers)

4. Flue & Combustion Checks

• Check the flue for safe emissions
• Perform a flue gas analysis to ensure the boiler is burning fuel correctly
• Ensure there are no dangerous carbon monoxide leaks

5. Gas Pressure & Flow Checks

• Check gas pressure is correct
• Ensure the boiler is operating at the right flow rate

6. Safety Device Testing

• Test safety devices and controls
• Check pressure relief valve

7. System Pressure Check

• Check and adjust boiler pressure if necessary
• Inspect expansion vessel

8. Service Report

• Provide a service record
• Highlight any faults or potential future issues
• Recommend repairs if needed

Boiler Installation

Installing a new boiler can improve your home’s comfort, safety, and energy efficiency. If your current boiler is old, unreliable, or expensive to run, upgrading could save you money and stress in the long run.

1. Improved Energy Efficiency

Modern boilers are far more efficient than older models. Many new condensing boilers operate at over 90% efficiency, meaning less wasted energy and lower heating bills.

2. Lower Energy Bills

An inefficient boiler works harder and uses more fuel. Replacing it with a modern A-rated boiler can significantly reduce monthly gas costs.

3. Fewer Breakdowns

Older boilers are more likely to break down, especially during winter when you need them most. A new boiler provides greater reliability and peace of mind.

4. Improved Safety

A new boiler reduces the risk of gas leaks, carbon monoxide issues, and other safety concerns associated with aging systems.

5. Better Heating Performance

Enjoy faster heating, stronger water pressure (depending on system type), and more consistent hot water.

6. Quieter Operation

Modern boilers run much more quietly than older systems.

7. Smart Controls & Technology

New systems are compatible with smart thermostats, allowing better control and improved efficiency.

8. Manufacturer Warranty

New boilers often come with warranties ranging from 5 to 10 years, offering long-term

Boiler Repairs

A broken boiler can be stressful — especially when you’re left without heating or hot water. Our experienced engineers provide fast, reliable boiler repairs to get your system back up and running as quickly as possible.

Fast Response When You Need It Most

We understand that boiler problems can’t wait. Whether it’s no heating, no hot water, low pressure, strange noises, or a leak, our team is ready to diagnose and fix the issue efficiently.

What We Repair

We carry out repairs on:

• No heating or hot water
• Low boiler pressure
• Leaking boilers
• Frozen condensate pipes
• Faulty thermostats
• Ignition and pilot light issues
• Noisy boilers (kettling or banging)

Professional Fault Diagnosis

Our qualified engineers will:

• Identify the cause of the fault
• Carry out all necessary safety checks
• Replace faulty parts where required
• Fully test your boiler to ensure it’s working safely and efficiently

Honest Advice

If your boiler is becoming unreliable or uneconomical to repair, we’ll give you straightforward advice on your options — with no pressure.

Why Choose Us?

• Qualified and experienced engineers
• Fast response times
• Transparent pricing
• Reliable and tidy workmanship

If your boiler has stopped working or isn’t performing as it should, contact us today to book a repair

Central Heating Repairs

If your central heating system isn’t working properly, it can quickly make your home uncomfortable — especially during colder months. Our experienced engineers provide fast and reliable central heating repairs to restore warmth and comfort to your property.

Common Central Heating Problems We Fix

We repair all types of central heating issues, including:

• Radiators not heating up
• Cold spots on radiators
• No heating throughout the property
• Leaking radiators or pipe work
• Noisy pipes or radiators
• Faulty pumps or motorised valves
• Thermostat and control issues
• Low system pressure
• Circulation problems

Through Fault Diagnosis

Our engineers will:

• Inspect your full heating system
• Identify the root cause of the issue
• Carry out necessary safety checks
• Repair or replace faulty components
• Fully test the system to ensure it’s working efficiently

Efficient & Reliable Service

We aim to complete most repairs on the first visit wherever possible. Our team works cleanly and professionally, ensuring minimal disruption to your home.

Honest Advice You Can Trust

If your system is outdated or repairs are becoming frequent, we’ll provide clear guidance on the most cost-effective solution — whether that’s repair or replacement.

Landlord Gas Safety Checks (CP12)

As a landlord, you are legally required to ensure all gas appliances, flues, and pipe work in your rental property are safe. We provide thorough Landlord Gas Safety Checks and issue a CP12 Gas Safety Certificate to keep you compliant and your tenants protected.

What Is a Landlord Gas Safety Check?

A Gas Safety Check is an annual inspection carried out by a Gas Safe registered engineer to ensure all gas appliances are operating safely and efficiently.

What We Check

During the inspection, we will:

• Inspect all gas appliances (boilers, cookers and gas fires (price may vary for gas fire inspection)
• Check flues and ventilation
• Test gas pipe work and tightness
• Ensure appliances are running correctly
• Check safety devices are functioning properly
• Identify any unsafe installations

Gas Safety Certificate (CP12)

Once the inspection is complete, you will receive a digital copy of certificate (CP12) confirming:

• Appliances checked
• Any safety issues identified
• Required remedial work (if applicable)
• Confirmation of compliance

We provide a digital copy of certificates for your records and for sharing with tenants.

Legal Requirements for Landlords

By law, landlords must:

• Arrange an annual Gas Safety Check
• Use a Gas Safe registered engineer
• Provide tenants with a copy of the certificate within 28 days
• Keep records for at least two years

Failure to comply can result in fines or legal action.

Why Choose Us?

• Qualified Gas Safe registered engineers
• Prompt and flexible appointment times
• Clear, competitive pricing
• Reliable certification and documentation

Book your Landlord Gas Safety Check today and ensure your property remains safe and legally compliant.